Anti-condensation anti-blow flat bag dust collector
Anti-condensation and anti-blow flat cloth bag dust collector is a product introduced by our company. Based on many years of production experience, our company has improved the original product. It is also a bag dust collector for separating dispersed particles from gas. . It contains a shell which is fixedly connected with two upper and lower flower plates to form the air inlet chamber, dust removal chamber and dust cleaning chamber. The three walls of the shell are equipped with air inlet pipe, air outlet pipe and dust cleaning door. The dust removal room is provided with a set of dust removal filter bags fixed on the two flower panels, which is characterized by a vibrating mesh frame suspended by steel wires suspended on the flower panels, and all filter bags pass through their mesh holes. Inside. The bag type dust collector of the utility model has the characteristics of anti-condensation and prevention of overheating of the dust-removing cloth bag, so it has reliable work, high dust removal efficiency, long service life and low manufacturing cost.
Anti-condensation and anti-blow flat bag dust collector has uniform structure, good anti-explosive performance and compact structure. It uses high-pressure fan to blow ash, which is not limited by air source. It uses resistance to automatically control the blow-back ash to save energy and extend the use of bags. , Indoor installation in severe cold areas can be installed in other areas, KL anti-condensation anti-blow flat cloth bag dust collector is a new type of pulse dust collector, which combines the advantages of various types of pulsed dust collectors to overcome The shortcomings of insufficient ash removal intensity and uneven air distribution in and out of the compartments have widened the application range. The structure of XMC type dust collector has its characteristics, so it improves the dust collection efficiency and adaptability, and prolongs the service life of the filter bag. After many years of production practice, the equipment runs stably, the maintenance amount is small, and the combination range is large. . KL anti-condensation and anti-blow flat cloth bag dust collector products can be widely used in dust and smoke collection systems such as crushing, mills, dryers, furnaces and kiln in asphalt mixing plants. The material of the dust collector filter bag is generally polyester needle. For felts, the continuous use temperature is ≤120 ° C. For example, if the filter bag uses METAS high-temperature needle felts, the allowable use temperature is up to 204 ° C. This series of dust collector can combine a variety of different types of dust collectors according to different specifications of solenoid valves. This series of dust collectors can be operated under negative pressure or positive pressure without any change in the structure of the body. The dust collection efficiency is more than 99.8%. If the concentration is less than 100mg / m3, if this series of dust collectors are used in cold areas or when the smoke is below zero, an insulation heating device should be added, and the casing should be changed accordingly. Bag dust collector can be widely used in many departments such as machinery, foundry, mining, smelting, building materials, food and chemical industry.