CCJ / A impulse type dust collector
The CCJ / A dust removal unit produced by our company is produced according to the Ct534 atlas compiled by Anshan Mine Design Institute and reviewed and approved by the Construction Science Research Institute of the State Construction Commission.
CCJ / A-10-1 dust removal unit model description:
This unit has a wide range of applications and can be used to purify non-fibrous, non-corrosive dusty gases with a turbidity not higher than 300 ° C. Suitable for metallurgy, coal, chemical industry, foundry, power generation, building materials and refractory materials. The dust removal in the viscous quick lime transportation system can also obtain good results, which is another outstanding advantage of the unit.
CCJ / A dust collector working principle:
Dust-containing gas is sucked into the inlet of the dust collector by the ventilator, the airflow turns downward and hits the water surface, and some larger dust particles are poured into the water. When the dust-containing gas passes through the "S" -shaped channel between the upper and lower blades at a speed of 18 to 35 meters per second, a large number of water splashes are aroused, and the water and gas are fully contacted, and most of the fine dust concrete is in the water , So that the dust-containing gas can be fully purified. After passing through the "S" -shaped channel, the water that obtained the dust particles returned to the funnel due to the centrifugal force. After the other body is purified, the water droplets are removed by the water-repellent outdoor deflector, and the dust is discharged through the air outlet and the ventilator, and the mud is regularly discharged by the discharge valve of the funnel. Fresh water is replenished by the water supply pipeline. The water level in the unit is controlled by the overflow box. When the water level is higher than the overflow weir, water flows into the water seal and is discharged by the overflow pipe. The automatic water level control device pumped on the overflow tank can ensure that the water level changes within the range of 3-5 mm, thereby ensuring the stable efficiency of the unit and saving water. The upper part of the overflow box is connected with the net gas mist chamber with a vent pipe, so that the two have the same height water surface. The water in the overflow box is communicated by inserting into the lower part of the dust collector to keep the water surface of the overflow box stable.