CCJ multi-tubular impact dust collector
When dust-containing gas enters the dust collector from the air inlet, large dust particles are blocked by the dust blocking plate, and smaller dust enters the CCJ multi-tubular impact dust collector combined box with the airflow. Inside. At this time, the dust-containing airflow is ejected from the nozzle through the ventilation duct at a relatively high speed, so the impact of the liquid surface impacts a lot of solution foam and water droplets.
When the dust exhaust gas in the production enters the dust collector from the air inlet of the upper box, the dust blocking plate is responsible for blocking the larger fructose dust outside, and then filtering and filtering by the dust filter bag, the smaller dust Follow the airflow into the conjoined box. Dust and airflow are then ejected from the nozzle by high-speed rotation. Due to inertia, it directly hits the liquid surface to form a large number of water droplets, thereby purifying the air. Under the action of negative pressure, the purified clean air removes dust and water mist through the baffle plate and is discharged at the fan mouth.
When the water stored in the device is used for a period of time, it will be doped with a lot of dust and needs to be replaced in time. The push rod serves such a role. A piston is connected to one end of the push rod. The dusty sewage is discharged through the drain. After the sewage is cleaned, the water level control system will automatically prompt to open the solenoid valve, and the clean water will rinse the bottom. Then close the drain outlet, fill the entire upper case with water, and then close the solenoid valve, and the entire process is successfully completed.
CCJ multi-tube impact type dust collector is mainly used in working conditions. CCJ multi-tube impact type dust collector is suitable for cleaning non-fibrous, non-corrosive dust-free gas at a temperature not higher than 300 ° C. Suitable for metallurgy, coal, chemical, foundry, power generation, building materials and refractory enterprises. Dust removal in viscous quicklime transportation systems can also achieve good results, which is another outstanding advantage of this unit. The height of the water seal of the overflow box is designed according to the negative pressure in the mist chamber of the machine component is not more than 400 mm water column or the positive pressure is not more than 150 mm water column. Otherwise, the overflow box needs to be designed separately.
CCJ Multi-tube Impact Dust Collector Overall Structure The dust collector is divided into two parts: upper and lower cabinets:
The upper box includes: inlet and outlet ducts, distribution air ducts, two flaps, nozzles, centrifugal fans, etc. (Type I does not include centrifugal fans)
The lower box includes: mud hopper, water spray pipe, etc.
The dust collector is additionally equipped with: an electric push rod, a liquid controller, a solenoid valve and a U-shaped differential pressure meter.