废气内含有粉尘（炭黑、硫磺粉、金属氧化物、促进剂等）、苯类有机物（苯、甲苯、乙苯、邻二甲苯、间二甲苯、对二甲苯）、胺类有机物（苯胺等）、有机硫（硫化羟、二硫化碳等）、酚类（酚、对苯二酚等）、非甲烷总烃（己烷等）及四氯化碳、4-甲基-2-戊酸等等几百种有机化合物，不但对操作工人的身体健康造成直接危害，同时也污染了周围的大气环境。 As we all know, Baoding is a base for the production of rubber. Baoding has thousands of rubber factories, large and small. During the production process of rubber, there is a large amount of rubber exhaust gas in the mixer. The exhaust gas contains dust (carbon black , Sulfur powder, metal oxides, accelerators, etc.), benzene organic matter (benzene, toluene, ethylbenzene, o-xylene, m-xylene, p-xylene), amine organic matter (aniline, etc.), organic sulfur (hydroxyl sulfide) , Carbon disulfide, etc.), phenols (phenol, hydroquinone, etc.), non-methane total hydrocarbons (hexane, etc.), carbon tetrachloride, 4-methyl-2-pentanoic acid, etc. hundreds of organic compounds, not only It directly harms the health of the workers and pollutes the surrounding atmosphere. Because there is a large amount of exhaust gas generated in the workshop, it is impractical for us to treat the entire workshop, and the cost is also high, and the treatment effect is not good. In response to this situation, Wo Nuohe adopted a specialized and authoritative solution, because no matter Whether it is smoking or smelling, there will be a point of smoking and smelling. We will treat it according to the point of smoking and smelling. Reduced size reduces processing air volume, reduces dust removal equipment and 的投资。 Investment in VOC exhaust gas treatment equipment .
When the mixer is working, a large amount of dust and odor will be generated. If a photo-oxygen catalytic device is used alone, there is no way to control the dust, and when the amount of dust on the lamp tube of the photo-oxygen catalytic device is too large, the ultraviolet lamp The tube cannot function, so you need to add a dust removal equipment in front of the photo-oxygen catalytic equipment, because the dust temperature from the internal mixer is not very high, and the dust is not corrosive. Therefore, our company recommends using a normal temperature bag filter Dust removal. The process is that the exhaust gas can be led out through a pipe, and then enter a bag filter for dust removal and purification, and the gas without dust is removed by a photo-oxidation catalytic device to remove odors. This scheme is effective, and the cost of crossing streets in the later stage is not high, and it can meet the discharge standards.