捕鱼大作战

GMC type high temperature pulse bag filter-Novo environmental protection equipment

诺和布袋除尘器
  • 布袋除尘器多种行业解决方案
  • 除尘布袋厂家直销
GMC型高温脉冲布袋除尘器

GMC type high temperature pulse bag filter

It can run stably in the exhaust dust removal of vertical kilns, dryers, clinker coolers, etc. in the cement industry, and its emission concentration is less than 100mg / Nm3.
Place of Origin: China> Hebei> Cangzhou> Botou City
Supplier: Botou Nuohe Environmental Protection Equipment Co., Ltd.
Phone: 0317-8315225 Fax: 0317-8315251

GMC type high temperature pulse bag filter

I. Overview
是泊头诺和环保设备有限公司引进、消化、吸收德国具有上世纪九十年代先进技术,并结合中国特点,自行研制出来的一种新型收尘器。 GMC type pulse bag dust collector is a new type of dust collector developed by Botou Nuohe Environmental Protection Equipment Co., Ltd. which has introduced, digested and absorbed German advanced technology from the 1990s and combined with Chinese characteristics. The pulse bag type dust collector type dust collector adopts high pressure (0.5 ~ 0.4MPa) large flow pulse valve to remove dust from the filter bag one by one. £ 5μm,含量 ³ 70%以上)的气体中,把99.9%以上的粉尘收集下来。 Capable of collecting more than 99.9% of dust from a large amount of fine dust (particulate £ 5μm, content ³ 70% or more). 3 It can run stably in the exhaust dust removal of vertical kilns, dryers, clinker coolers, etc. in the cement industry, and its emission concentration is less than 100mg / Nm 3 . This type of dust collector has advanced domestic level. At present, under the new environmental protection conditions, it is not only widely used in the dust management of cement plants, but also widely used in the non-metal ore fine processing industry. It also has good application prospects in the power, chemical, metallurgical, and steel industries.
Structure and working principle
脉冲袋式除尘器 结构 该设备主要有以下部分组成: 1.Pulse bag type dust collector structure The equipment mainly consists of the following parts:
(1) Box: Including bag room, pre-dust collection room, air cleaning room, perforated plate, dust bag, filter bag frame. The cabinet is designed to withstand pressure 9000Pa.
(2) Blowing system: main air pipe, blowing pipe, pulse valve, controller.
(3) There are two types of ash bucket and ash discharge part: one is that the ash bucket is directly connected to the ash discharge valve, and the other is that the ash bucket is connected to the ash discharge valve through a conveying device (such as a screw conveyor). The main body of the pulse bag type dust collector is a full rigid structure design, and the cold stamping process of the flower plate is used to increase the strength and ensure the quality of the equipment. In addition to the normal temperature gas, the structure of this type of pulse bag duster is suitable for high temperature gas. At this time, if the shell needs to be insulated, the LBY type light rock wool board can be used for double insulation. The shell is δ = 0.5mm galvanized sheet. It is protected and installed by a new process of pulling rivets, and different filter materials and filtering wind speeds are selected according to the use environment.
2. Working principle Dust-containing gas enters the expanded ash hopper of the dust collector for pre-dust collection. The deflectors are evenly distributed between each dust removal filter bag, and the dust is retained on the outer surface of the filter bag, so that the resistance of the equipment does not exceed 1200Pa, the high-pressure gas is pulsed through the solenoid valve, so that the compressed air (0.5 ~ 0.7MPa) in the air bag is ejected from the nozzle hole (called primary air) and the ambient air induced by the venturi is several times higher than the primary air (called The secondary air) enters the dust-removing cloth bag and expands rapidly in an instant, and the dust is shaken off in the opposite direction of the air flow to achieve the purpose of dust removal. Using a microcomputer automatic control device, the dust cleaning cycle and pulse spray time can be adjusted at will according to the dust, so that the dust collector operates within the specified range.
2.Selection parameters and selection principles
(1) The main technical parameters of pulse bag type dust collector selection are air volume, gas temperature, dust concentration and humidity. According to the large values of the air volume, gas temperature, and dust concentration in the process design, and the principle is slightly smaller than the values in the technical performance table, the corresponding pulse bag dust collector model is the required pulse dust collector model. The dust removal filter bag is determined according to the inlet concentration, gas temperature and humidity content.
(2) The air consumption in the table is the case of centralized air supply in the factory. For example, when the air machine is used alone, the actual air consumption should be increased to 1.5 times the value in the table.
(3) In the column of compressed air consumption, the proposed air consumption is the air consumption of this type of equipment.
3. The appearance and foundation of the equipment are shown in the attached drawings. Our factory can also design dust collectors that meet the requirements of users based on the site conditions.

GMC type high temperature pulse bag dust collector technical performance table   


GMC60-2

GMC60-3

GMC60-4

GMC60-5

GMC70-5

3 /h Air volume m 3 / h

10000 ~ 16000

15000 ~ 25000

20000 ~ 33000

26000 ~ 41000

32000 ~ 48000

2 Total filtration area m 2

184

267

368

459

536

Filtering wind speed m / min

0.91 ~ 1.45

0.91 ~ 1.45

0.91 ~ 1.51

0.91 ~ 1.49

0.94 ~ 1.49

Number of filter bags (strips)

120

180

240

300

350

Resistance Pa

≤1200

3 n Inlet concentration g / m 3 n

≤200

3 n Outlet concentration mg / m 3 n

≤60

Blowing pressure (MPa)

0.5-0.7

Withstand pressure Pa

9000

Number of pulse valves

10

15

20

25

25

3 /min Air consumption m 3 / min

0.65

1.01

1.37

1.73

2.09

2 Insulation area m 2

44

50

82

96

112

Equipment weight kg

6600

8250

10500

13250

15500

Power consumption (KW)

2.2

2.2

5.2

5.2

5.2

Note:

表中设备重量不含爬梯用户自备; 设备 The weight of the equipment in the table does not include the equipment provided by the user.

设备支腿安装高度如有特殊要求,定货时须说明; 如有 If there are special requirements for the installation height of the equipment legs, please specify when ordering

所耗功率不含压缩空气耗电。 功率 The power consumption does not include the power consumption of compressed air.
GMC type high temperature pulse bag dust collector technical performance table


GMC70-6

GMC70-7

GMC70-8

GMC60-2 × 5

GMC70-2 × 5

3 /h Air volume m 3 / h

38000-57000

44000-67000

51000-77000

55000-82000

64000-96000

2 Total filtration area m 2

643

750

857

918

1070

Filtering wind speed m / min

1.00-1.49

0.98-1.48

0.99-1.50

1.00-1.49


Number of filter bags (strips)

420

490

560

600

700

Resistance Pa

≤1200

3 n Inlet concentration g / m 3 n

≤200

3 n Outlet concentration mg / m 3 n

≤60

Blowing pressure (MPa)

0.5-0.7

Withstand pressure Pa

9000

Number of pulse valves

30

35

40

50

50

3 /min Air consumption m 3 / min

2.08

2.10

2.10

2.10

2.10

2 Insulation area m 2

125

138

153

185

210

Equipment weight kg

17500

20500

23500

25500

29800

Power consumption (KW)

5.2

8.1

9.7

10.4

10.4


Note:

表中设备重量不含爬梯用户自备; 设备 The weight of the equipment in the table does not include the equipment provided by the user.

设备支腿安装高度如有特殊要求,定货时须说明; 如有 If there are special requirements for the installation height of the equipment legs, it must be specified when ordering;

所耗功率不含压缩空气耗电。 功率 The power consumption does not include the power consumption of compressed air.

And GMC type high temperature pulse bag filter

UF型单机布袋除尘器精益求精!
UF type stand-alone bag filter is a small bag dust collector, economical and practical; simple and compact structure, easy installation, convenient maintenance (internal filter type) is mainly used for the discharge of the warehouse roof, warehouse floor, warehouse roof and various conveyors, etc. And dust collection point.
滤袋座除尘配件品质说明一切!
The filter bag holder is mainly used in a new type of pulse spray bag type dust collector that is convenient for the installation and removal of filter bags. The use of the filter bag holder makes the installation and removal of the dust bag very convenient.
木器家具厂除尘器|家具厂除尘设备价优同行!
As an old manufacturer specializing in the production of dust collectors for wood furniture factories, Wo Nuohe has more than ten years of production experience, and the technicians it hires also have more than 10 years of dust removal technology experience. Over the years, through the joint efforts of all employees of our company, it has established a good reputation for our factory Nuohe environmental protection brand.
UF-(STD、FM、FB)型系列单机袋除尘器卓越从我开始!
Compared with other types of dust collectors, bag-type dust collectors have commendable advantages in terms of economy, structure, installation, and maintenance. Stand-alone bag dust collectors are mainly used in various warehouse roofs and warehouses. Bottom, warehouse roof, and various conveying equipment, such as dust collection point dust collection. In the combination of multiple machines, you can use small mills, crushers and other continuous working lines as dust collection equipment.

related search

Related Links:

Company address: Botou Industrial Development Zone Post code: 062150 Tel: 0317-8315225 Fax: 0317-8315251 Email: [email protected] Click here to send me a message 2680390260
ICP No. 13015532
share to: