脉冲除尘器气包是设计成圆形还是方形气包必须考虑安全性和质量可靠性。 1. Whether the air bag of the pulse precipitator is designed as a round or square air bag must consider safety and quality reliability.
2. The pulsator air bag must have a sufficient capacity to meet the injection volume of the dust collector equipment. Generally, the pressure drop of the air bag after pulse injection is preferably not more than 30% of the original storage pressure.
脉冲除尘器 的气包径昼应该选的大点，满足气包的补气速度，大容量的气包可以多设几个进气输入管路。 3. The air bag diameter of the pulse precipitator should be selected at a large point during the day to meet the replenishment speed of the air bag. A large-capacity air bag can be provided with several additional air inlet input lines.
4. For airbags with large air volume, 76mm pipelines can be used to connect multiple small airbags to form a gas storage circuit. The installation position is preferably on the top or side of the airbag. To prevent foreign matter from entering the dust collector filter bag , the submerged electromagnetic pulse valve should be installed on the air bag.
The air bag of the 5 pulse dust collector must be replaced with a two-way solenoid valve or an oil-water separator to periodically discharge the air bag impurities.
脉冲除尘器气包制作完成后，必须清除内部了焊渣，然后在进行安装，在车间内测试3寸淹没式电磁脉冲阀的时候，必须保证气包压缩气体的压力和补气量，否则脉冲阀不能打开或者出现漏气现象。 6. After the production of the air bag of the pulse dust collector is completed, the internal welding slag must be removed, and then when installing and testing the 3-inch submerged electromagnetic pulse valve in the workshop, the pressure and the make-up volume of the compressed gas in the air bag must be guaranteed, otherwise The pulse valve cannot be opened or air leakage occurs.
如果在 除尘设备 安装现场，发现电磁脉冲阀上有漏气现象，那就是气包内有杂质引起的，此杂质导致电磁脉冲阀小膜片堆积铁锈不能闭阀，需要拆卸小膜片清扫。 7. If there is air leakage on the electromagnetic pulse valve at the installation site of the dust removal equipment , it is caused by impurities in the air bag. This impurity causes the small diaphragm of the electromagnetic pulse valve to accumulate rust and cannot be closed. The small diaphragm needs to be removed for cleaning. .
The design scheme of the pulse dust collector blowing system must comply with the above seven items before it can reach the standard product.
Botou Nuohe Environmental Protection Equipment Co., Ltd.
Contact: Zhao Yanhong Telephone: 18034170669
The high-voltage electrostatic precipitator for dryers produced by Novo Environmental Protection is a high-efficiency dust collector specially designed for rotary dryers in cement plants.
HD series stand-alone bag dust collector is also called stand-alone dust collector, stand-alone dust collector, bag dust collector, stand-alone bag dust collector, which is specially designed for cement plants ...
Our company's hand-cranked warehouse top dust collector is a kind of dust removal equipment with manual ash cleaning structure. This type of dust collector is used in mining, metallurgy, building materials, machinery, chemical ...
Cyclone dust collector, multi-tube cyclone dust collector Novo manufactures with environmental protection first, direct sales of high quality and low price, welcome customers to trust to buy.