The number of vertical ribs of the dust removal framework of the dust removal accessories
is determined according to the force of the dust bag on the unit surface and the material of the filter bag. The diameter of the initial dust bag was 120-130mm, and the number of vertical ribs of the dust removal skeleton was 8; later, the dust bag with a diameter of 160mm appeared, and the rigid ribs of the dust removal skeleton were 12. At present, the size of the dust bag is diversified, ranging from 120-180 mm in diameter, and the vertical ribs of the dust removal frame are correspondingly made into 12-24 pieces.
Dust removal accessories Dust removal bags account for 20% of the operating costs of the dust collector. With the increasing application of bag dust collector equipment, owners are paying more and more attention to the service life of the dust removal bags. Therefore, many dust bag manufacturers have made their products longer and more durable. Attraction, it is desirable to reduce the force on the surface of the filter bag by increasing the number of vertical ribs in the bag cage.
From the perspective of extending the service life of the dust removal bag, it is indeed beneficial to increase the vertical ribs of the dust removal skeleton. Because the dust bag is holding the frame vertically, it is bent and folded back and forth between the vertical ribs of the dust removal frame of the dust removal accessories, which directly affects the life of the bag. But isn't it applicable in any case?
For example: the fiberglass filter bag has poor bending resistance. At the same diameter, the number of vertical ribs of the dust removal framework of the dust removal accessories should be more, and the rib spacing is about 19mm. Less. The rib pitch is about 38mm.