Catalytic combustion integrated exhaust gas treatment system Features: 1. Adopting the combined process of adsorption concentration + catalytic oxidation, the whole system realizes the closed cycle of purification and desorption process. Compared with the recovery type organic waste gas purification device, there is no need to prepare additional energy such as compressed air and steam, and no secondary pollution occurs during operation. , Equipment investment and operating costs are low. 2. The front end adopts dry dust filtering device, which has high purification efficiency and ensures the service life of the adsorption device. 3. Specially shaped honeycomb activated carbon is used as the adsorption material, the adsorbent has a long life, low adsorption system resistance and high purification efficiency; 4. The honeycomb ceramics impregnated with precious metals palladium and platinum are used as catalysts, with a catalytic purification rate of over 97%, long catalyst life, low exhaust gas decomposition temperature, short desorption preheating time, and low energy consumption. 5. The activated carbon adsorption bed that adsorbs organic waste gas can be desorbed by recycling the hot gas after catalytic combustion. The desorbed gas is sent to the catalytic combustion chamber for purification treatment. When the concentration of organic waste gas exceeds 2000 PPM, it can maintain spontaneous combustion.No additional energy is required, the running cost is low, and the energy saving effect is significant. 6. The microcomputer centralized control system is adopted, the equipment operation and operation process are fully automated, and the operation process is stable and reliable. 7. Complete facilities. A fire valve is installed between the gas source and the equipment. The desorption temperature entering the activated carbon bed is strictly controlled during desorption. It is equipped with flame arresters, temperature sensors, explosion-proof ports, alarms and automatic shutdown and other protective measures.